Tec Air

Tec Air is not a product, it's not a process

Start Exploring

quality runs deep

By focussing on the key areas of the production process, we have been able to identify ways we can improve the result. This varies from detailing exactly where and how the layers are bonded together or how the rocker curve is applied to the board.

We make sure that no area of the design process is ignored. Our obsessive attention to detail on the inside of the board ensures the best experience, for you, the paddler on the outside.

Premium Construction

Red Paddle Co boards are manufactured using specially produced, high density drop stitch that makes for a stronger and stiffer core.

If you look at a Red board, there are thousands of dimples spread all over the board. Each dimple represents an internal thread. Drop stitch is the name given to the material inside an inflatable board.

We do not use Linear drop stitch, which is a mass produced, cheap material that cannot hold high pressure. Linear boards can be identified by the straight lines of dimples on the board. For an idea of the differences check out this video by clicking here.

SHOP ALL PADDLE BOARDS

A superb cosmetic finish

First, we use a machine to weave the high-density inner core. Next, we cover the woven surface in an adhesive that seals the woven material, so it is completely airtight.

This adhesive also acts as a bonding layer with a high-density structural PVC that is machine laminated onto the first layer.

The rail truth

The rail can be the weakest point on an inflatable board. It is where all layers meet and where air pressure loading is at its highest.

Red Paddle Co boards have 3 layers of taping on the rails making them the strongest boards available.

Most other boards are just 1 layer thick. Our 3-layer rail almost completely removes the risk of puncture or material failure, allowing you to use the board with total confidence.

You could completely remove the outer rail tapes and the board would be useable. Other boards would deflate immediately if you removed or made a rip in the rail tapes, making them susceptible to issues such as bulging, leaking or blowing-out.

MSL1000: COMPACT PERFORMANCE

A unique weave process and high-definition fibre matrix create a highly malleable, featherlight construction with improved eco credentials. MSL®1000 allows you to take your board pretty much anywhere.

MSL TOUGH: HEAVY DUTY DUARBILITY

MSL®TOUGH is a super-durable material with increased outer coating used in our inflatable rescue boards. Designed for lifesaving professionals to withstand harsh environments and heavy surf.

Discover red rescue

Tec air in depth

The rail truth

The rail can be the weakest point on an inflatable board. It is where all layers meet and where air pressure loading is at its highest.

Red Paddle Co boards have 3 layers of taping on the rails making them the strongest boards available.

Most other boards are just 1 layer thick. Our 3-layer rail almost completely removes the risk of puncture or material failure, allowing you to use the board with total confidence.

You could completely remove the outer rail tapes and the board would be useable. Other boards would deflate immediately if you removed or made a rip in the rail tapes, making them susceptible to issues such as bulging, leaking or blowing-out.

Rocket fast rockers

We build rockers into our boards that give the board an authentic feel when paddled. All other boards on the market have up turned noses and tail which are not functional or effective in promoting glide and control. Our rockers are progressive. This means the rocker curve starts well back on the board and slowly increases as it reaches the nose. This progressive rocker is one of the key ingredients to our authentic feel.

Our Rockers are built to allow the board to perform. This is the reason why you will find boards like the 14’0” Elite Race outperform all other inflatable boards of the same size and are faster and more efficient than many hard boards.